[1]王建国,周侗柱,戚斐文,等.凉水井矿综采工作面粉尘运移规律数值仿真[J].西安科技大学学报,2020,(02):195-203.
 WANG Jian-guo,ZHOU Tong-zhu,QI Fei-wen,et al.Numerical simulation of dust movement rules at fully-mechanized mining faces in Liangshuijing coal mine[J].Journal of Xi'an University of Science and Technology,2020,(02):195-203.
点击复制

凉水井矿综采工作面粉尘运移规律数值仿真(/HTML)
分享到:

西安科技大学学报[ISSN:1672-9315/CN:61-1434/N]

卷:
期数:
2020年02期
页码:
195-203
栏目:
出版日期:
2020-03-30

文章信息/Info

Title:
Numerical simulation of dust movement rules at fully-mechanized mining faces in Liangshuijing coal mine
文章编号:
1672-9315(2020)02-0195-09
作者:
王建国12周侗柱12戚斐文12张亚平23
(1.西安科技大学 安全科学与工程学院,陕西 西安 710054; 2.西安科技大学 西部矿井开采及灾害防治教育部重点实验室,陕西 西安 710054; 3.西安科技大学 能源学院,陕西 西安710054)
Author(s):
WANG Jian-guo12ZHOU Tong-zhu12QI Fei-wen12ZHANG Ya-ping23
(1.College of Safety Science and Engineering,Xi'an University of Science and Technology,Xi'an 710054,China; 2.Key Laboratory of Western Mine Exploitation and Hazard Prevention,Ministry of Education,Xi'an University of Science and Technology,Xi'an 710054,China; 3.College of Energy Engineering,Xi'an University of Science and Technology,Xi'an 710054,China)
关键词:
安全科学与工程 粉尘运移规律 数值仿真 粉尘防治
Keywords:
safety science and engineering dust movement rules numerical simulation dust control
分类号:
TD 724
文献标志码:
A
摘要:
为研究凉水井矿42112综采工作面粉尘运移规律,基于Fluent数值仿真软件,选用标准k-epsilon湍流模型以及DPM计算模型建立了气-固两相流的粉尘运移数学和物理模型。用数值仿真及现场实测的方法研究了凉水井矿综采工作面风流运动情况,以及在移架和割煤时粉尘的运移规律和悬浮时间。研究表明:风流沿工作面在速度上表现出“小-大-小”的规律,速率和湍流强度在采煤机附近达到最大,在人行道空间有一定的低值区域。移架产生的粉尘一部分随风流运动,另一部分因粒径不同沉降到巷道底板不同位置。采煤机割煤产生的大粒径粉尘在重力作用下逐渐沉降,小粒径粉尘随气流继续运动,粉尘浓度最大处为前后滚筒附近及后滚筒下风向10 m左右靠近煤壁一侧区域,但扩散性不大,随着粉尘团向后移动,影响范围不断扩大,直至向整个工作面弥散。综采工作面粉尘在距底板1 m处粉尘浓度最高且分布范围最广,在巷道上部空间,直径大于100 μm的粉尘粒子迅速沉降,而随着粒径减小,粉尘悬浮时间也逐渐延长。本研究可为综采工作面除尘、抑尘提供参考。
Abstract:
In order to explore the movement pattern of dust generated by support advancing and shearer cutting at 42112 fully-mechanized mining face in Liangshuijing Coal Mine,based on Fluent numerical simulation software,the standard k-epsilon turbulence model and DPM on model were used to establish the mathernatical and physical models of the gas-solid two-phase flow dust transportation.The numerical simulation and on-site measurement method were used to study the air movement of the working faces,the dust migration law in moving and cutting the coal,and the suspension time at different heights and with different particle sizes.The results reveal that the airflow velocity shows the “small-large-small” pattern when the airflow enters the mining face,and the flow rate and turbulence intensity reach the maximum in the vicinity of the shearer and a low value area in the sidewalk space.Part of the dust generated by the moving frame is moving with the wind flow,and the other part is sliding to different positions of the roadway bottom plate due to different particle sizes.Among the dust generated by the coal cutting machine,the large-size dust gradually settles under the action of gravity,and the small-sized continues to move with the airflow.The maximum concentration is near the front and the rear drums and the wind direction of the rear drum is about 10 m near the coal wall side,where the diffusivity is not large.As the dust group moves backwards,the scope of influence continues to expand until it spreads to the entire working surface.In the fully mechanized mining working face,the dust has the highest concentration and the widest distribution range at 1 m from the bottom plate.In the upper space of the roadway,the dust particles with a diameter larger than 100 μm settle rapidly,and as the particle size decreases,the dust suspension time also gradually increases.The conclusion here is helpful for dust removal and suppression in the fully mechanized mining face.

参考文献/References:

[1] YU Hai-ming,CHENG Wei-min,WANG Hao,et al.Formation mechanisms of a dust-removal air curtain in a fully-mechanized excavation face and an analysis of its dust-removal performances based on CFD and DEM[J].Advanced Powder Technology,2017,28(11):2830-2847. [2] LU Yue-ze,AKHTAR SAAD,SAMITO AGUS P,et al.Prediction of air flow,methane,and coal dust dispersion in a room and pillar mining face[J].International Journal of Mining Science and Technology,2017,27(4):657-662. [3] 许满贵,刘欣凯,文新强,等.煤矿综采工作面粉尘分布及运移规律研究[J].西安科技大学学报,2014,34(5):533-538. XU Man-gui,LIU Xin-kai,WEN Xin-qiang,et al.Research of coal mine dust distribution and movement laws on fully-mechanized working face[J].Journal of Xi'an University of Science and Technology,2014,34(5):533-538. [4] LI Shi-hang,XIE Biao,HU Shu-da,et al.Removal of dust produced in the roadway of coal mine using a mining dust filtration system[J].Advanced Powder Technology,2019,30(5):911-919. [5] LI Shi-hang,ZHOU Fu-bao,WANG Fei,et al.Application and research of dry-type filtration dust collection technology in large tunnel construction[J].Advanced Powder Technology,2017,28(12):3213-3221. [6]Patankar N A,Joseph D D.Modeling and numerical simulation of particulate flows by the Eulerian-Lagrangian approach[J].International Journal of Multiphase Flow,2001,27(10):1659-1684. [7] 王 晔.综采工作面呼吸性粉尘分布规律的数值模拟研究[D].西安:西安科技大学,2016. WANG Ye.Research on numerical simulation of respirable dust distribution rule in fully-mechanized mining face[D].Xi'an:Xi'an University of Science and Technology,2016. [8]白若男,张 琦,于海明,等. 综采工作面风速对粉尘分布规律影响的数值模拟分析[J].煤矿安全,2015,46(9):180-183. BAI Ruo-nan,ZHANG Qi,YU Hai-ming,et al.Numerical simulation analysis of dust distribution laws affected by wind speed at fully-mechanized working face[J].Safety in Coal Mines,2015,46(9):180-183. [9]雷 猛.基于时间尺度的综采工作面粉尘运移规律研究[J].煤矿安全,2019,50(3):185-188. LEI Meng.Study on dust migration laws of fully mechanized mining face based on time scale[J].Safety in Coal Mines,2019,50(3):185-188. [10] 蒋仲安,张中意,谭 聪,等.基于数值模拟的综采工作面通风除尘风速优化[J].煤炭科学技术,2014,42(10):75-78. JIANG Zhong-an,ZHANG Zhong-yi,TAN Cong,et al.Optimization on air velocity for ventilation and dust control of fully mechanized coal mining face based on numerical simulation[J].Coal Science and Technology,2014,42(10):75-78. [11]蒋仲安,陈 雅,王 佩.双尘源耦合下呼吸性粉尘扩散的紊流系数求解[J].哈尔滨工业大学学报,2017,49(8):129-134. JIANG Zhong-an,CHEN Ya,WANG Pei.Solution of turbulence coefficient in the diffusion of respirable dust under the coupling of two dust sources[J].Journal of Harbin Institute of Technology,2017,49(8):129-134. [12]谭 聪,蒋仲安,王 明,等.综放工作面多尘源粉尘扩散规律的相似实验[J].煤炭学报,2015,40(1):122-127. TAN Cong,JIANG Zhong-an,WANG Ming,et al.Similarity experiment on multi-source dust diffusion law in fully mechanized caving face[J].Journal of China Coal Society,2015,40(1):122-127. [13]张 广,尚少鹏,武文斐.大采高综采工作面煤尘质量浓度分布特性[J].辽宁工程技术大学学报(自然科学版),2014,33(4):456-460. ZHANG Guang,SHANG Shao-peng,WU Wen-fei.Coal dust concentration distribution of fully-excavating working face by modeling analysis[J].Journal of Liaoning Technical University(Natural Science),2014,33(4):456-460. [14]吴立荣,王 丹.基于FLUENT综放工作面移架作业粉尘运移及浓度变化规律模拟[J].矿业安全与环保,2015,42(5):29-33. WU Li-rong,WANG Dan.Simulation of dust migration and concentration change law during powered support advance in fully mechanized top-coal caving face based on fluent[J].Mining Safety and Environmental Protection,2015,42(5):29-33. [15] 左前明.大采高综采工作面煤尘扩散规律及防治技术[D].徐州:中国矿业大学,2014. ZUO Qian-ming.Diffusion law and dust control techniques of large mining height fully-mechanized face[D].Xuzhou:China University of Mining and Technology,2014. [16]谭 聪,蒋仲安,陈举师,等.综采割煤粉尘运移影响因素的数值模拟[J].北京科技大学学报,2014,36(6):716-721. TAN Cong,JIANG Zhong-an,CHEN Ju-shi,et al.Numerical simulation of influencing factors on dust movement during coal cutting at fully mechanized working faces[J].Journal of University of Science and Technology Beijing,2014,36(6):716-721. [17]ZHOU Gang,ZHANG Qi,BAI Ruo-nan,et al.The diffusion behavior law of respirable dust at fully mechanized caving face in coal mine:CFD numerical simulation and engineering application[J].Process Safety and Environmental Protection,2017,106:117-128. [18]姬玉成,楼建国,张留祥.综采工作面割煤时粉尘运移变化规律的数值研究[J].四川师范大学学报(自然科学版),2014,37(3):419-423. JI Yu-cheng,LOU Jian-guo,ZHANG Liu-xiang.Numerical study of the dust distribution laws in airflow of fully-mechanized mining faces[J].Journal of Sichuan Normal University(Natural Science),2014,37(3):419-423. [19] 陈 雅.综采工作面双尘源多场耦合模型及仿真模拟研究[D].北京:北京科技大学,2019. CEHN Ya.Multi-field coupling model and simulation of dual dust sources in fully mining face[D].Beijing:University of Science and Technology Beijing,2019. [20] 冯 博,卢晓龙,王 峰.综采工作面采煤机在不同区域粉尘逸散规律数值模拟[J].煤矿安全,2018,49(11):176-179. FENG Bo,LU Xiao-long,WANG Feng.Numerical simulation of laws of dust dispersion of coal cutter working at different regions of fully mechanized coal mining face[J].Safety in Coal Mines,2018,49(11):176-179. [21] 王 健.采煤工作面回风巷风流中粉尘运移沉降特征研究[D].北京:中国矿业大学(北京),2017. WANG Jian.Research on dust migration and settlement characteristics in the return airway wind flow of coal mining face[D].Beijing:China University of Mining and Technology,Beijing,2017. [22]王宝晴,张 超,刘 建.不同风速下巷道断面微细粉尘分布模拟试验研究[J].中国安全科学学报,2018,28(3):44-49. WANG Bao-qing,ZHANG Chao,LIU Jian.Simulation experimental study on fine dust distribution over roadway section under different wind speeds[J].China Safety Science Journal,2018,28(3):44-49. [23]庞杰文,谢建林,卢国菊,等.长抽短压通风下综掘工作面粉尘分布特征研究[J].煤炭科学技术,2017,45(10):76-81,134. PANG Jie-wen,XIE Jian-lin,LU Guo-ju,et al.Study on dust distribution features of fully-mechanized heading face under long distance exhausted and short distance forced ventilation[J].Coal Science and Technology,2017,45(10):76-81,134. [24] 肖峻峰,许 峰,樊世星,等.大断面综掘巷道长压短抽条件下粉尘运移模拟[J].中国安全科学学报,2017,27(2):127-132. XIAO Jun-feng,XU Feng,FAN Shi-xing,et al.Simulation of dust diffusion in fully mechanized excavation face having large cross-section under FPNA ventilation condition[J].China Safety Science Journal,2017,27(2):127-132. [25] 马 威,刘 勇,陈 芳.难湿润煤层快速综掘工作面粉尘防治技术[J].煤炭科学技术,2015,43(1):70-73. MA Wei,LIU Yong,CHEN Fang.Fine dust prevention and control technology of rapid fully-mechanized working face in wetting difficultly seam[J].Coal Science and Technology,2015,43(1):70-73. [26]张立志,王 潇,张召强.综采工作面煤尘粒度分布特性分析[J].煤矿现代化,2017(2):138-140. ZHANG Li-zhi,WANG Xiao,ZHANG Zhao-qiang.Numerical simulation and analysis of particle size distribution of coal dust in fully mechanized face[J].Coal Mine Modernization,2017(2):138-140.

相似文献/References:

[1]秦忠诚,陈光波,李 谭,等.“AHP+熵权法”的CW-TOPSIS煤矿内因火灾评价模型[J].西安科技大学学报,2018,(02):193.[doi:10.13800/j.cnki.xakjdxxb.2018.0204]
 QIN Zhong-cheng,CHEN Guang-bo,LI Tan,et al.CW-TOPSIS mine internal caused fire evaluation model of “AHP+ entropy weight method”[J].Journal of Xi'an University of Science and Technology,2018,(02):193.[doi:10.13800/j.cnki.xakjdxxb.2018.0204]
[2]潘红宇,董晓刚,张天军,等.单轴压缩下松软煤样破裂损伤演化特性研究[J].西安科技大学学报,2018,(02):202.[doi:10.13800/j.cnki.xakjdxxb.2018.0205]
 PAN Hong-yu,DONG Xiao-gang,ZHANG Tian-jun,et al.Evolution characteristics of soft coal sample fracture damage under uniaxial compression[J].Journal of Xi'an University of Science and Technology,2018,(02):202.[doi:10.13800/j.cnki.xakjdxxb.2018.0205]
[3]姜 华,邵珅菲,宫武旗,等.叶片形状对对旋风机正反风性能影响[J].西安科技大学学报,2018,(02):230.[doi:10.13800/j.cnki.xakjdxxb.2018.0209]
 JIANG Hua,SHAO Shen-fei,GONG Wu-Qi,et al.Forward and reverse aerodynamic performance of different wing-shaped blades of a contra-rotating axial-flow fan[J].Journal of Xi'an University of Science and Technology,2018,(02):230.[doi:10.13800/j.cnki.xakjdxxb.2018.0209]
[4]林海飞,杨二豪,赵鹏翔,等.类岩石材料力学特性参数多元线性回归模型[J].西安科技大学学报,2018,(03):351.[doi:10.13800/j.cnki.xakjdxxb.2018.0302]
 LIN Hai-fei,YANG Er-hao,ZHAO Peng-xiang,et al.Multivariate linear regression model of the mechanical properties of rock-like materials[J].Journal of Xi'an University of Science and Technology,2018,(02):351.[doi:10.13800/j.cnki.xakjdxxb.2018.0302]
[5]赵大龙,田水承,王 璟,等.矿工大五人格特质对煤矿险兆事件上报的影响[J].西安科技大学学报,2018,(03):360.[doi:10.13800/j.cnki.xakjdxxb.2018.0303]
 ZHAO Da-long,TIAN Shui-cheng,WANG Jing,et al.Influence of miners'big-five personality trait on coal mine near-miss reporting[J].Journal of Xi'an University of Science and Technology,2018,(02):360.[doi:10.13800/j.cnki.xakjdxxb.2018.0303]
[6]李 品.中国能源供给安全影响因素研究[J].西安科技大学学报,2018,(03):403.[doi:10.13800/j.cnki.xakjdxxb.2018.0309]
 LI Pin.Influential factors of energy supply security of China[J].Journal of Xi'an University of Science and Technology,2018,(02):403.[doi:10.13800/j.cnki.xakjdxxb.2018.0309]
[7]张 锐,王 亮,高 杰,等.岩浆岩圈闭区煤层钻屑瓦斯解吸指标敏感性研究[J].西安科技大学学报,2018,(03):417.[doi:10.13800/j.cnki.xakjdxxb.2018.0311]
 ZHANG Rui,WANG Liang,GAO Jie,et al.Desorption index sensitivity of drilling cuttings of coal seams in igneous rock trap area[J].Journal of Xi'an University of Science and Technology,2018,(02):417.[doi:10.13800/j.cnki.xakjdxxb.2018.0311]
[8]司 鹄,赵剑楠,胡千庭.大数据理论下的煤与瓦斯突出事故致因分析[J].西安科技大学学报,2018,(04):515.[doi:10.13800/j.cnki.xakjdxxb.2018.0401 ]
 SI Hu,ZHAO Jian-nan,HU Qian-ting.Analysis of causes of coal and gas outburst accidents based on big data theory[J].Journal of Xi'an University of Science and Technology,2018,(02):515.[doi:10.13800/j.cnki.xakjdxxb.2018.0401 ]
[9]王亚超,魏子淇,王彩萍,等.黄铁矿对煤氧化表面官能团的影响[J].西安科技大学学报,2018,(04):585.[doi:10.13800/j.cnki.xakjdxxb.2018.0410 ]
 WANG Ya-chao,WEI Zi-qi,WANG Cai-ping,et al.Effects of pyrite on functional groups during coal oxidation[J].Journal of Xi'an University of Science and Technology,2018,(02):585.[doi:10.13800/j.cnki.xakjdxxb.2018.0410 ]
[10]张景飞,郭 倩,朱同功,等.多场耦合下煤岩渗透率演化规律——以平煤十矿为例[J].西安科技大学学报,2018,(05):713.[doi:10.13800/j.cnki.xakjdxxb.2018.0504]
 ZHANG Jing-fei,GUO Qian,ZHU Tong-gong,et al.Evolution of coal rock permeability with multiphysics coupling——taking PingMei No.10 mine as an example[J].Journal of Xi'an University of Science and Technology,2018,(02):713.[doi:10.13800/j.cnki.xakjdxxb.2018.0504]

备注/Memo

备注/Memo:
收稿日期:2019-07-22 责任编辑:杨泉林
基金项目:国家自然科学基金(51634007)
通信作者:王建国(1977-),男,山东济南人,博士,副教授,E-mail:wjg1118@126.com
更新日期/Last Update: 2020-03-30