[1]刘 超,程 成,崔 娜.弹性模量对岩石注浆裂缝形成影响分析[J].西安科技大学学报,2017,(05):760-764.[doi:10.13800/j.cnki.xakjdxxb.2017.0525]
 LIU Chao,CHENG Cheng,CUI Na.Influence analysis of the elastic moduluson fractures formation law in rock grouting[J].Journal of Xi'an University of Science and Technology,2017,(05):760-764.[doi:10.13800/j.cnki.xakjdxxb.2017.0525]
点击复制

弹性模量对岩石注浆裂缝形成影响分析(/HTML)
分享到:

西安科技大学学报[ISSN:1672-9315/CN:61-1434/N]

卷:
期数:
2017年05期
页码:
760-764
栏目:
出版日期:
2017-09-30

文章信息/Info

Title:
Influence analysis of the elastic moduluson fractures formation law in rock grouting
文章编号:
1672-9315(2017)05-0760-05
作者:
刘 超12程 成1崔 娜2
1.西安科技大学 安全科学与工程学院,陕西 西安 710054; 2. 教育部 西部矿井开采及灾害防治重点实验室,陕西 西安 710054
Author(s):
LIU Chao12CHENG Cheng1CUI Na2
College of Safety Science and Engineering,Xi'an University of Science and Technology,Xi'an 710054,China; 2.Key Laboratory of Western Mine Exploration and Hazard Prevention,Ministry of Education,Xi'an 710054,China
关键词:
注浆 单孔岩石 弹性模量 RFPA模拟 裂隙特征
Keywords:
Key words:grouting single foramen rock mass elastic modulus RFPA simulation crack feature
分类号:
TD 315
DOI:
10.13800/j.cnki.xakjdxxb.2017.0525
文献标志码:
A
摘要:
为了更深入的了解注浆过程中裂隙的产生规律,采用RFPA-flow软件,建立了裂隙岩体注浆模型,模拟了岩体注浆过程中破裂萌生、扩展、相互作用直至模型失稳破裂的全过程。结果表明:岩体注浆压裂过程中,不同弹性模量的岩石对注浆过程中裂纹产生的结果有较大的影响,弹性模量的改变会影响岩石的初始破裂压力,随着弹性模量的增加,岩石所需的破裂压力越大且岩石越难破裂,岩体模型失稳所需的注浆压力也随之增加。只改变岩石的弹性模量而不改变其他条件下,由于岩石破裂难度的提升浆液的流动难度也随之增加,弹性模量越大的岩石浆液越难流动。研究结果揭示不同弹性模量的岩石在相同条件下的注浆致裂裂纹形成规律,旨在对现场施工进行理论指导。
Abstract:
Abstract:In order to understand the producing law of the grouting cracks deeply, the model of fractured rock mass grouting is established by using RFPA-flow software to simulate the whole process of the fracture initiation, propagation, interaction in grouting process until the fracture due to the model's instability.The results shows that during the fissure production in the rock fracturing grouting, rocks of different elastic modulus have a great effect on the results of the fissureproduction.A change of the rock's elastic modulus affects the initial fracture pressure of the rock.The greater the elastic modulus of the rock is,the higher breaking pressure is needed and the harder it becomes for the rock to break, thus, the model's instability of the rock needs more grouting pressure.Liquid in different elastic modulus has different fluid ability.While the other conditions remain the same, the increasing elastic modulus makes the liquid fluid increasingly difficult. The research results show us the rules of the fissure formation in the grouting of rocks of different elastic modulus under the same constraints to eventually guide the site construction.

参考文献/References:

[1] 张永成.注浆技术[M].北京:煤炭工业出版社,2012. ZHANG Yong-cheng. Cementation technology[M]. Beijing:China Coal Industry Publishing House,2012.
[2] 谢涛锋,谢文兵,荆升国,等.地下工程劈裂注浆的数学模型研究[J].现代隧道技术,2015,52(2):105-109. XIE Tao-feng,XIE Wen-bing,JING Sheng-guo,et al.A mathematical model for fracture grouting in underground engineering[J].Modern Tunnelling Technology, 2015,52(2):105-109.
[3] 刘 健,刘人太.水泥浆液裂隙注浆扩散规律模型试验与数值模拟[J].岩石力学与工程学报,2012,31(12):2 445-2 452. LIU Jian,LIU Ren-tai.Diffusion law model test and numerical simulation of cement fracture grouting[J]. Chinese Journal of Rock Mechanics and Engineering,2012,31(12):2 445-2 452.
[4]刘 强,张可能.不同土体中水泥-水玻璃浆液的扩散规律[J].中南大学学报,2015,46(1):255-260. LIU Qiang,ZHANG Ke-neng.Diffusion law of cement-sodium silicate grout in different soils[J].Journal of Central South University,2015,46(1):255-260.
[5] 葛家良,陆士良. 注浆模拟试验及其应用的研究[J].岩土工程学报,1997,19(3):31-36. GE Jia-liang,LU Shi-liang. Study on grouting simulation experiment and its application[J]. Chinese Journal of Geotechnical Engineering,1997,19(3):31-36.
[6]湛铠瑜,隋旺华.动水条件下单裂隙注浆模型试验系统设计[J].实验室研究与探索,2011,30(10):13-20. ZHAN Kai-yu,SUI Wang-hua.Design of model test system for grouting into a single fracture with flowing water [J].Research and Exploration in Laboratory,2011,30(10):13-20.
[7]杨圣奇,韩立军,渠 涛,等.注浆锚固裂隙砂岩破裂模式和裂纹扩展特征[J].工程力学,2010,27(12):156-163. YANG Sheng-qi,HAN Li-jun,QU Tao,et al.Failure more and crack propagation of sandstone with pre-existing fissures under different anchorages by grouting[J].Engineering Mechanics,2010,27(12)156-163.
[8]杨志全,侯克鹏.幂律型流体的柱-半球形渗透注浆机制研究[J].岩石力学与工程学报,2014,33(S2):3 840-3 846. YANG Zhi-quan,HOU Ke-peng.Study of column-hemispherical penetration grouting mechanism based on power-law fluid[J].Chinese Journal of Rock Mechanics and Engineering,2014,33(S2):3 840-3 846.
[9] 杨宏民,杨峰峰,安丰华,等.煤层瓦斯压力测定的合理封孔注浆压力研究[J].中国安全生产科学技术,2015,11(5):13-17. YANG Hong-min,YANG Feng-feng,AN Feng-hua,et al.Study on reasonable grouting sealing pressure for hole sealing in the determination of coal seam gas pressure[J].Journal of Safety Science and Technology, 2015,11(5):13-17.
[10]王有熙,邓广哲. 煤层注水破坏机理的能量耗散分析[J].西安科技大学学报,2013,33(2):143-148. WANG You-xi,DENG Guang-zhe.Energy dissipation of coal seam water injection failure mechanism[J].Journal of Xi'an University of Science and Technology,2013,33(2)143-148.
[11]冷雪峰,唐春安,杨天鸿,等.岩石水压致裂过程的数值模拟分析 [J]. 东北大学学报:自然科学版,2002,23(11):1 104-1 107. LENG Xue-feng,TANG Chun-an,YANG Tian-hong,et al.Numerical simulation and analysis on heterogeneous and permeable rocks under hydraulic fracturing[J].Journal of Northeastern University:Natural Science Edition,2002,23(11):1 104-1 107.
[12]陈 峰.基于数值模拟的采动影响下覆岩裂隙演化过程分析[J].中国地质灾害与防治学报2014,25(2):60-64. CHEN Feng.Numerical simulation study of overlying strata crack evolution process influence by mining[J].The Chinese Journal of Geological Hazard and Control,2014,25(2):60-64.
[13]杨天鸿,唐春安,朱万成,等.岩石破裂过程渗流与应力耦合分析[J].岩土工程学报,2001,23(4):489-493. YANG Tian-hong,TANG Chun-an,ZHU Wan-cheng,et al.Coupling analysis of seepage and stresses in rock failure process[J].Chinese Jounal of Geotechnical Engineering,2001,23(4):489-493.
[14]杨天鸿,唐春安,刘红元,等.承压水底板突水失稳过程的数值模型初探[J].地质力学学报,2003,9(3): 281-288. YANG Tian-hong,TANG Chun-an,LIU Hong-yuan,et al.Numerical model of the instability failure process of the coal bed floor due to confined water inrush[J].Journal of Geomechanics,2003,9(3): 281-288.

备注/Memo

备注/Memo:
基金项目:国家自然科学基金(51674189,51327007); 陕西省青年科技新星项目(2016kJxx-37) 作者简介:刘 超(1981-),男,河南信阳人,副教授,E-mail:liuchao_2001@163.com
更新日期/Last Update: 2017-11-08