[1]张 靖,张爱能,刘国栋.三维激光扫描仪技术在地形测量中的应用[J].西安科技大学学报,2014,(02):199-203.
 ZHANG Jing,ZHANG Ai-neng,LIU Guo-dong.Application of 3D laser scanning technology in topographical survey[J].Journal of Xi'an University of Science and Technology,2014,(02):199-203.
点击复制

三维激光扫描仪技术在地形测量中的应用(/HTML)
分享到:

西安科技大学学报[ISSN:1672-9315/CN:61-1434/N]

卷:
期数:
2014年02期
页码:
199-203
栏目:
出版日期:
2014-04-30

文章信息/Info

Title:
Application of 3D laser scanning technology in topographical survey
文章编号:
1672-9315(2014)02-0199-05
作者:
张 靖1张爱能1刘国栋2
1.长安大学 地质工程与测绘学院,陕西 西安 710064;
2.重庆交通大学 土木建筑学院,重庆 400074
Author(s):
ZHANG Jing1ZHANG Ai-neng1LIU Guo-dong2
1.School of Geology Engineering and Geomatics,Chang'an University,Xi'an 710064,China;
2.School of Civil Engineering &
Architecture,Chongqing Jiaotong University,Chongqing 400074,China
关键词:
激光扫描 坐标转换 地形图 精度分析
Keywords:
laser scanning coordinate transformation topographic maps precision analysis
分类号:
P 217
文献标志码:
A
摘要:
利用三维激光测量技术进行山区复杂地形测量的流程与方法,实验通过使用徕卡ScanStation2型号的三维激光扫描仪对西安市白鹿原北坡进行了扫描,对扫描后的各测站数据进行基于标靶的拼接,对拼接后的点云数据进行预处理。将基于扫描仪坐标系统的点云数据转换到基于施工独立坐标系统后,使用Geomagic和cass软件绘制地形图等高线。在测区内布设一定数量检核点,扫描时在检核点上安置蓝白标靶,采用全站仪测量检核点的独立坐标与扫描仪测量的坐标进行对比来验证扫描数据的精度,得到平面坐标差值绝对值最大值为0.024 m,而高程的差值绝对值最大值为0.029 m,实验结果表明,三维激光扫描仪满足地形测量精度要求。
Abstract:
With the rapid development of 3D laser scanning technique,3D laser scanners have been extensively applied in many fields.The paper mainly described the application of 3D laser scanner in topographical survey.By using the leica ScanStation2 3D laser scanner to scan a terrain,after the scan data coordinate system conversion,using Geomagic,and cass software mapping topographic maps contour.The precision was confirmed by the comparison of the detail points' coordinates measured by Total station and scanner coordinates.The result of experiment showed that the precision of 3D laser scanner could satisfy the requirements of topographical survey.In conclusion,the paper summarized the advantage of the usage of 3D laser scanning technology in topographical survey.

参考文献/References:

[1] 刘昌军,赵雨,叶长锋,等.基于三维激光扫描技术的矿山地形快速测量的关键技术研究[J].测绘通报,2012(6):43-46. LIU Chang-jun,ZHAO Yu,YE Chang-feng,et al.Study of the key technologies for mine rapid topographic survey based on 3D laser measurement[J].Bulletin of Surveying and Mapping,2012(6):43-46.
[2] 彭维吉,李孝雁,黄 飒.基于地面三维激光扫描技术的快速地形图测绘[J].测绘通报,2013(3):70-72. PENG Wei-ji,LI Xiao-yan,HUANG Sa.Rapid topographic mapping using terrain 3D laser scanning technique[J].Bulletin of Surveying and Mapping,2013(3):70-72.
[3] 李 亮,吴 侃,刘 虎,等.地面三维激光扫描地形测量数据粗差剔除算法及实现[J].测绘科学,2010,35(3):187-189. LI Liang,WU Kan,LIU Hu,et al.Gross error elimination of terrain survey data obtained by terrestrial 3D laser scanning system[J].Science of Surveying and Mapping,2010,35(3):187-189.
[4] 何秉顺,赵进勇,王 力,等.三维激光扫描技术在堰塞湖地形快速测量中的应用[J].防灾减灾工程学报,2008(3):394-398. HE Bing-shun,ZHAO Jin-yong,WANG Li,et al.Application of 3D LIDAR in landslide lake topographic measurement[J].Journal of Disaster Prevention and Mitigation,2008(3):394-398.
[5] 吕宝雄,巨天力.三维激光扫描技术在水电大比例尺地形测量中的应用研究[J].西北水电,2011(1):14-16. LV Bao-xiong,JU Tian-li.Study on application of 3D laser scanning technology in hydropower large scale topographical survey[J].Northwest Hydropower,2011(1):14-16.
[6] 陈 静,李清泉,李必军.激光扫描测量系统的应用研究[J].测绘工程,2001,10(1):49-52. CHEN Jing,LI Qing-quan,LI Bi-jun.Application research on laser-scanning surveying system[J].Engineering of Surveying and Mapping,2001,10(1):49-52.
[7] 梅文胜,周燕芳,周 俊.基于地面三维激光扫描的精细地形测绘[J].测绘通报,2010(1):53-56. MEI Wen-sheng,ZHOU Yan-fang,ZHOU Jun.Fine topographic mapping based on ground three-dimensional laser scanning[J].Bulletin of Surveying and Mapping,2010(1):53-56.
[8] 曹 玺,梁 俊,王延洪,等.三维激光扫描技术在地形测绘成图中的应用[J].人民长江,2011,42(21):22-24. CAO Xi,LIANG Jun,WANG Yan-hong,et al.Application of 3D LIDAR in terrain surveying and mapping[J].Yangtze Rive,2011,42(21):22-24.
[9] 宗刚军,姚顽强.工程测量中新旧坐标转换的一种实现方法[J].西安科技大学学报,2007,27(3):401-404. ZONG Gang-jun,YAO Wan-qiang.Implementing of coordinate transfering between two survey system in engineering survey[J].Journal of Xi'an University of Science and Technology,2007,27(3):401-404.
[10]刘万林,郭 岚,王 利.多面函数法与移动法的加权综合模型在GPS水准中的应用[J].西安科技大学学报,2004,24(3):310-312. LIU Wan-lin,GUO Lan,WANG Li.Application of combining multisurface function andmovement method in GPS leveling[J].Journal of Xi'an University of Science and Technology,2004,24(3):310-312.
[11]马素文.三维激光扫描在测量中的应用现状[J].山西建筑,2011,37(9):207-208. MA Su-wen.Application status of 3D laser scanner in the measurement[J].Shanxi Architecture,2011,37(9):207-208.
[12]张启福,孙现申.三维激光扫描仪测量方法与前景展望[J].北京测绘,2011(1):39-42. ZHANG Qi-fu,SUN Xian-shen.Measuring principle and developmental prospect of 3D laser scanner[J].Beijing Surveying and Mapping,2011(1):39-42.
[13]吴 侃,黄承亮,陈冉丽.三维激光扫描技术在建筑物变形监测的应用[J].辽宁工程技术大学学报:自然科学版,2011,30(2):205-208. WU Kan,HUANG Cheng-liang,CIHEN Ran-li.Application of 3D laser scanning technology in monitoring building deformation[J].Journal of Liaoning Technical University:Natural Science Edition,2011,30(2):205-208.

相似文献/References:

[1]赵洲,侯恩科,李成.三维体元拓扑数据模型中空间剖面的定义及坐标转换研究[J].西安科技大学学报,2007,(01):54.[doi:10.3969/j.issn.1672-9315.2007.01.012]
 ZHAO Zhou HOU En-ke LI Cheng.Sections definition and coordinates conversion about the three-dimensional topological data model based on component[J].Journal of Xi'an University of Science and Technology,2007,(02):54.[doi:10.3969/j.issn.1672-9315.2007.01.012]
[2]宗刚军,姚顽强.工程测量中新旧坐标转换的一种实现方法[J].西安科技大学学报,2007,(03):399.
 ZONG Gang-jun,YAO Wan-qiang.Implementing of coordinate transfering between two survey system in engineering survey[J].Journal of Xi'an University of Science and Technology,2007,(02):399.

备注/Memo

备注/Memo:

通讯作者:张 靖(1989-),男,江苏金湖人,硕士研究生,E-mail:Happyzhangjing1989@163.com
更新日期/Last Update: 2014-04-30